Most Commonly Requested Standards
IEC 60931-3 Ed. 1.0 b:1996, Shunt capacitors of the non-self-healing type for AC power systems having a rated voltage up to and including 1000 V - Part 3: Internal fusesIEC 60931-3 Ed. 1.0 b:1996, Shunt capacitors of the non-self-healing type for AC power systems having a rated voltage up to and including 1000 V - Part 3: Internal fuses
IEC 62153-4-3 Ed. 1.0 b:2006, Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial methodIEC 62153-4-3 Ed. 1.0 b:2006, Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial method
ISO/IEC TR 19759:2005, Software Engineering - Guide to the Software Engineering Body of Knowledge (SWEBOK)ISO/IEC TR 19759:2005, Software Engineering - Guide to the Software Engineering Body of Knowledge (SWEBOK)
ISO 8960:1991, Refrigerators, frozen-food storage cabinets and food freezers for household and similar use -- Measurement of emission of airborne acoustical noiseISO 8960:1991, Refrigerators, frozen-food storage cabinets and food freezers for household and similar use -- Measurement of emission of airborne acoustical noise
ISO 2410:1973, Household refrigerators -- Methods of test for the information of the consumerISO 2410:1973, Household refrigerators -- Methods of test for the information of the consumer
IEC 60151-25 Ed. 1.0 b:1971, Measurements of the electrical properties of electronic tubes and valves. Part 25: Methods of measurement of Geiger-Mueller counter tubesIEC 60151-25 Ed. 1.0 b:1971, Measurements of the electrical properties of electronic tubes and valves. Part 25: Methods of measurement of Geiger-Mueller counter tubes
IEC 60256 Ed. 1.0 b:1967, External diameters of cylindrical radiation probes containing Geiger-Mnller or proportional counter tubes or scintillation detectorsIEC 60256 Ed. 1.0 b:1967, External diameters of cylindrical radiation probes containing Geiger-Mnller or proportional counter tubes or scintillation detectors
ISO 10110-14:2003, Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation toleranceISO 10110-14:2003, Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance
ISO 590:1981, Oil of brazilian sassafrasISO 590:1981, Oil of brazilian sassafras
ISO/TR 9901:1990, Solar energy -- Field pyranometers -- Recommended practice for useISO/TR 9901:1990, Solar energy -- Field pyranometers -- Recommended practice for use
 

ANSI Standards: ANSI

    RSS - Subscribe to ANSI Standards: ANSI

    
 Sort by:  

Showing items 3981-3990 of 18390
« Previous1...394395396397398399400Next »
 
ISO 9087:1998, Wood - Determination of nail and screw holding power under axial load application  ISO 9087:1998, Wood - Determination of nail and screw holding power under axial load application
Author: ISO TC 165

Buy New: $48.00
as of 7/30/2010 08:45 CDT details

Qty In Stock


Category: Book
ASIN: B000XYSZXM
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
ISO 6520-1:1998, Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding  ISO 6520-1:1998, Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding
Author: ISO TC 44/SC 7

Buy New: $104.00
as of 7/30/2010 08:45 CDT details

Qty In Stock


Category: Book
ASIN: B000XYSU7S
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours


ISO 6974-4:2000, Natural gas -- Determination of composition with defined uncertainty by gas chromatography -- Part 4: Determination of nitrogen, carbon ... and on-line measuring system using two colu  ISO 6974-4:2000, Natural gas -- Determination of composition with defined uncertainty by gas chromatography -- Part 4: Determination of nitrogen, carbon ... and on-line measuring system using two colu
Author: ISO TC 193/SC 1/WG 8

Buy New: $82.00
as of 7/30/2010 08:45 CDT details

Qty In Stock


Category: Book
ASIN: B000XYSV5E
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
ISO 7599:1983, Anodizing of aluminium and its alloys - General specifications for anodic oxide coatings on aluminium  ISO 7599:1983, Anodizing of aluminium and its alloys - General specifications for anodic oxide coatings on aluminium
Author: ISO TC 79/SC 2

Buy New: $64.00
as of 7/30/2010 08:45 CDT details

Qty In Stock


Sales Rank: 5006563
Category: Book
ASIN: B000XYSWJ4
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours


ISO 7388-2:1984, Tool shanks with 7/24 taper for automatic tool changers - Part 2 : Retention knobs for shanks Nos. 40, 45 and 50 - Dimensions and mechanical characteristics  ISO 7388-2:1984, Tool shanks with 7/24 taper for automatic tool changers - Part 2 : Retention knobs for shanks Nos. 40, 45 and 50 - Dimensions and mechanical characteristics
Author: ISO TC 39/WG 11

Buy New: $42.00
as of 7/30/2010 08:45 CDT details

Qty In Stock


Category: Book
ASIN: B000XYSW6C
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
ISO 8821:1989, Mechanical vibration - Balancing - Shaft and fitment key convention  ISO 8821:1989, Mechanical vibration - Balancing - Shaft and fitment key convention
Author: ISO TC 108/SC 1

Buy New: $82.00
as of 7/30/2010 08:45 CDT details

Qty In Stock


Category: Book
ASIN: B000XYSZ5U
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours


ISO 8783:1999, Alpine skis -- Guidelines for conducting slope performance tests  ISO 8783:1999, Alpine skis -- Guidelines for conducting slope performance tests
Author: ISO TC 83/SC 4

Buy New: $48.00
as of 7/30/2010 08:45 CDT details

Qty In Stock


Category: Book
ASIN: B000XYSZ46
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
ISO 8178-5:1997, Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels  ISO 8178-5:1997, Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels
Author: ISO TC 70/SC 8/WG 2

Buy New: $137.00
as of 7/30/2010 08:45 CDT details

Qty In Stock


Category: Book
ASIN: B000XYSXN4
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours


ISO 9455-11:1991, Soft soldering fluxes - Test methods - Part 11: Solubility of flux residues  ISO 9455-11:1991, Soft soldering fluxes - Test methods - Part 11: Solubility of flux residues
Author: ISO TC 44/SC 12

Buy New: $48.00
as of 7/30/2010 08:45 CDT details

Qty In Stock


Category: Book
ASIN: B000XYT0Y0
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
ISO 7539-8:2000, Corrosion of metals and alloys -- Stress corrosion testing -- Part 8: Preparation and use of specimens to evaluate weldments  ISO 7539-8:2000, Corrosion of metals and alloys -- Stress corrosion testing -- Part 8: Preparation and use of specimens to evaluate weldments
Author: ISO TC 156

Buy New: $102.00
as of 7/30/2010 08:45 CDT details

Qty In Stock


Category: Book
ASIN: B000XYSWGC
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
Showing items 3981-3990 of 18390
« Previous1...394395396397398399400Next »
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
ANSI Standards
Best selling ANSI standards
ISO 10816-3:1998, Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal ... r/min and 15 000 r/min when measured in situISO 10816-3:1998, Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal ... r/min and 15 000 r/min when measured in situ
ISO 7919-2:2001, Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators ... r/min, 1800 r/min, 3000 r/min and 3600 r/ISO 7919-2:2001, Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators ... r/min, 1800 r/min, 3000 r/min and 3600 r/
ISO 1087-1:2000, Terminology work -- Vocabulary -- Part 1: Theory and applicationISO 1087-1:2000, Terminology work -- Vocabulary -- Part 1: Theory and application
ISO 12199:2000, Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabetISO 12199:2000, Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet
ISO/IEC 9796-2:2002, Information technology -- Security techniques -- Digital signature schemes giving message recovery -- Part 2: Integer factorization based mechanisms (available in English only)ISO/IEC 9796-2:2002, Information technology -- Security techniques -- Digital signature schemes giving message recovery -- Part 2: Integer factorization based mechanisms (available in English only)
ISO/IEC 20000-1:2005, Information technology - Service management - Part 1: SpecificationISO/IEC 20000-1:2005, Information technology - Service management - Part 1: Specification
ISO/IEC 17025:2005, General requirements for the competence of testing and calibration laboratoriesISO/IEC 17025:2005, General requirements for the competence of testing and calibration laboratories
ISO 22000:2005, Food safety management systems - Requirements for any organization in the food chainISO 22000:2005, Food safety management systems - Requirements for any organization in the food chain
IEC 62153-4-3 Ed. 1.0 b:2006, Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial methodIEC 62153-4-3 Ed. 1.0 b:2006, Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial method
ISO 19005-1:2005, Document management - Electronic document file format for long-term preservation - Part 1: Use of PDF 1.4 (PDF/A-1)ISO 19005-1:2005, Document management - Electronic document file format for long-term preservation - Part 1: Use of PDF 1.4 (PDF/A-1)