Most Commonly Requested Standards
IEC 60931-3 Ed. 1.0 b:1996, Shunt capacitors of the non-self-healing type for AC power systems having a rated voltage up to and including 1000 V - Part 3: Internal fusesIEC 60931-3 Ed. 1.0 b:1996, Shunt capacitors of the non-self-healing type for AC power systems having a rated voltage up to and including 1000 V - Part 3: Internal fuses
IEC 62153-4-3 Ed. 1.0 b:2006, Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial methodIEC 62153-4-3 Ed. 1.0 b:2006, Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial method
ISO/IEC TR 19759:2005, Software Engineering - Guide to the Software Engineering Body of Knowledge (SWEBOK)ISO/IEC TR 19759:2005, Software Engineering - Guide to the Software Engineering Body of Knowledge (SWEBOK)
ISO 8960:1991, Refrigerators, frozen-food storage cabinets and food freezers for household and similar use -- Measurement of emission of airborne acoustical noiseISO 8960:1991, Refrigerators, frozen-food storage cabinets and food freezers for household and similar use -- Measurement of emission of airborne acoustical noise
ISO 2410:1973, Household refrigerators -- Methods of test for the information of the consumerISO 2410:1973, Household refrigerators -- Methods of test for the information of the consumer
IEC 60151-25 Ed. 1.0 b:1971, Measurements of the electrical properties of electronic tubes and valves. Part 25: Methods of measurement of Geiger-Mueller counter tubesIEC 60151-25 Ed. 1.0 b:1971, Measurements of the electrical properties of electronic tubes and valves. Part 25: Methods of measurement of Geiger-Mueller counter tubes
IEC 60256 Ed. 1.0 b:1967, External diameters of cylindrical radiation probes containing Geiger-Mnller or proportional counter tubes or scintillation detectorsIEC 60256 Ed. 1.0 b:1967, External diameters of cylindrical radiation probes containing Geiger-Mnller or proportional counter tubes or scintillation detectors
ISO 10110-14:2003, Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation toleranceISO 10110-14:2003, Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance
ISO 590:1981, Oil of brazilian sassafrasISO 590:1981, Oil of brazilian sassafras
ISO/TR 9901:1990, Solar energy -- Field pyranometers -- Recommended practice for useISO/TR 9901:1990, Solar energy -- Field pyranometers -- Recommended practice for use
 

ANSI Standards: ANSI

    RSS - Subscribe to ANSI Standards: ANSI

    
 Sort by:  

Showing items 31-40 of 18390
« Previous123456789...400Next »
 
ISO 9241-11:1998, Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability  ISO 9241-11:1998, Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability
Author: ISO TC 159/SC 4/WG 5

Buy New: $116.00
as of 7/30/2010 08:44 CDT details

Qty In Stock


Sales Rank: 1966385
Category: Book
ASIN: B000XYT0AO
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
IEC 60747-7-5 Ed. 1.0 en:2005, Semiconductor devices - Discrete devices - Part 7-5: Bipolar transistors for power switching applications  IEC 60747-7-5 Ed. 1.0 en:2005, Semiconductor devices - Discrete devices - Part 7-5: Bipolar transistors for power switching applications
Author: IEC TC/SC 47E

Buy New: $68.00
as of 7/30/2010 08:44 CDT details

Qty In Stock


Sales Rank: 2007537
Category: Book
ASIN: B000XYS4EM
Publication Date: August 19, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours


ISO 14121:1999, Safety of machinery - Principles of risk assessment  ISO 14121:1999, Safety of machinery - Principles of risk assessment
Author: ISO TC 199

Buy New: $92.00
as of 7/30/2010 08:44 CDT details

Qty In Stock


Sales Rank: 2009948
Category: Book
ASIN: B000XYTI92
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
ISO 12100-1:2003, Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology  ISO 12100-1:2003, Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology
Author: ISO/TC 199

Buy New: $144.00
as of 7/30/2010 08:44 CDT details

Qty In Stock


Sales Rank: 1994549
Category: Book
ASIN: B000Y2U8T2
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours


ISO 13794:1999, Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method  ISO 13794:1999, Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method
Author: ISO TC 146/SC 3/WG 1

Buy New: $187.00
as of 7/30/2010 08:44 CDT details

Qty In Stock


Sales Rank: 2100298
Category: Book
ASIN: B000XYTHBQ
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
ISO 10312:1995, Ambient air - Determination of asbestos fibres - Direct transfer transmission electron microscopy method  ISO 10312:1995, Ambient air - Determination of asbestos fibres - Direct transfer transmission electron microscopy method
Author: ISO TC 146/SC 3/WG 1

Buy New: $175.00
as of 7/30/2010 08:44 CDT details

Qty In Stock


Sales Rank: 2100297
Category: Book
ASIN: B000Y2U2DY
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours


IEC 61400-1 Ed. 3.0 en:2005, Wind turbines - Part 1: Design requirements  IEC 61400-1 Ed. 3.0 en:2005, Wind turbines - Part 1: Design requirements
Author: IEC TC/SC 88

Buy New: $241.00
as of 7/30/2010 08:44 CDT details

Qty In Stock


Sales Rank: 1911028
Category: Book
ASIN: B000XYS8IY
Publication Date: August 19, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
ISO 7943-3:1987, Photography -- Overhead projectors -- Part 3: Film rolls, cores and winders -- Dimensions  ISO 7943-3:1987, Photography -- Overhead projectors -- Part 3: Film rolls, cores and winders -- Dimensions
Author: ISO TC 42/WG 9

Buy New: $48.00
as of 7/30/2010 08:44 CDT details

Qty In Stock


Sales Rank: 2104984
Category: Book
ASIN: B000Y2THTY
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours


ISO 12635:1996, Graphic technology -- Plates for offset printing -- Dimensions  ISO 12635:1996, Graphic technology -- Plates for offset printing -- Dimensions
Author: ISO TC 130/WG 4

Buy New: $48.00
as of 7/30/2010 08:44 CDT details

Qty In Stock


Sales Rank: 2134073
Category: Book
ASIN: B000Y2U9HS
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
ISO 12648:2006, Graphic technology - Safety requirements for printing press systems  ISO 12648:2006, Graphic technology - Safety requirements for printing press systems
Author: ISO/TC 130

Buy New: $204.00
as of 7/30/2010 08:44 CDT details

Qty In Stock


Sales Rank: 2134072
Category: Book
ASIN: B000Y2U9LE
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
Showing items 31-40 of 18390
« Previous123456789...400Next »
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
ANSI Standards
Best selling ANSI standards
ISO 10816-3:1998, Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal ... r/min and 15 000 r/min when measured in situISO 10816-3:1998, Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal ... r/min and 15 000 r/min when measured in situ
ISO 7919-2:2001, Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators ... r/min, 1800 r/min, 3000 r/min and 3600 r/ISO 7919-2:2001, Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators ... r/min, 1800 r/min, 3000 r/min and 3600 r/
ISO 1087-1:2000, Terminology work -- Vocabulary -- Part 1: Theory and applicationISO 1087-1:2000, Terminology work -- Vocabulary -- Part 1: Theory and application
ISO 12199:2000, Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabetISO 12199:2000, Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet
ISO/IEC 9796-2:2002, Information technology -- Security techniques -- Digital signature schemes giving message recovery -- Part 2: Integer factorization based mechanisms (available in English only)ISO/IEC 9796-2:2002, Information technology -- Security techniques -- Digital signature schemes giving message recovery -- Part 2: Integer factorization based mechanisms (available in English only)
ISO/IEC 20000-1:2005, Information technology - Service management - Part 1: SpecificationISO/IEC 20000-1:2005, Information technology - Service management - Part 1: Specification
ISO/IEC 17025:2005, General requirements for the competence of testing and calibration laboratoriesISO/IEC 17025:2005, General requirements for the competence of testing and calibration laboratories
ISO 22000:2005, Food safety management systems - Requirements for any organization in the food chainISO 22000:2005, Food safety management systems - Requirements for any organization in the food chain
IEC 62153-4-3 Ed. 1.0 b:2006, Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial methodIEC 62153-4-3 Ed. 1.0 b:2006, Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial method
ISO 19005-1:2005, Document management - Electronic document file format for long-term preservation - Part 1: Use of PDF 1.4 (PDF/A-1)ISO 19005-1:2005, Document management - Electronic document file format for long-term preservation - Part 1: Use of PDF 1.4 (PDF/A-1)