Most Commonly Requested Standards
IEC 60931-3 Ed. 1.0 b:1996, Shunt capacitors of the non-self-healing type for AC power systems having a rated voltage up to and including 1000 V - Part 3: Internal fusesIEC 60931-3 Ed. 1.0 b:1996, Shunt capacitors of the non-self-healing type for AC power systems having a rated voltage up to and including 1000 V - Part 3: Internal fuses
IEC 62153-4-3 Ed. 1.0 b:2006, Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial methodIEC 62153-4-3 Ed. 1.0 b:2006, Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial method
ISO/IEC TR 19759:2005, Software Engineering - Guide to the Software Engineering Body of Knowledge (SWEBOK)ISO/IEC TR 19759:2005, Software Engineering - Guide to the Software Engineering Body of Knowledge (SWEBOK)
ISO 8960:1991, Refrigerators, frozen-food storage cabinets and food freezers for household and similar use -- Measurement of emission of airborne acoustical noiseISO 8960:1991, Refrigerators, frozen-food storage cabinets and food freezers for household and similar use -- Measurement of emission of airborne acoustical noise
ISO 2410:1973, Household refrigerators -- Methods of test for the information of the consumerISO 2410:1973, Household refrigerators -- Methods of test for the information of the consumer
IEC 60151-25 Ed. 1.0 b:1971, Measurements of the electrical properties of electronic tubes and valves. Part 25: Methods of measurement of Geiger-Mueller counter tubesIEC 60151-25 Ed. 1.0 b:1971, Measurements of the electrical properties of electronic tubes and valves. Part 25: Methods of measurement of Geiger-Mueller counter tubes
IEC 60256 Ed. 1.0 b:1967, External diameters of cylindrical radiation probes containing Geiger-Mnller or proportional counter tubes or scintillation detectorsIEC 60256 Ed. 1.0 b:1967, External diameters of cylindrical radiation probes containing Geiger-Mnller or proportional counter tubes or scintillation detectors
ISO 10110-14:2003, Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation toleranceISO 10110-14:2003, Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance
ISO 590:1981, Oil of brazilian sassafrasISO 590:1981, Oil of brazilian sassafras
ISO/TR 9901:1990, Solar energy -- Field pyranometers -- Recommended practice for useISO/TR 9901:1990, Solar energy -- Field pyranometers -- Recommended practice for use
 

ANSI Standards: ANSI

    RSS - Subscribe to ANSI Standards: ANSI

    
 Sort by:  

Showing items 61-70 of 18390
« Previous123456789101112...400Next »
 
ISO/IEC 19770-1:2006, Information technology - Software asset management - Part 1: Processes  ISO/IEC 19770-1:2006, Information technology - Software asset management - Part 1: Processes
Author: ISO/IEC/JTC 1/SC 7

Buy New: $122.00
as of 7/30/2010 08:39 CDT details

Qty In Stock


Sales Rank: 2080242
Category: Book
ASIN: B000Y2TUPU
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
ISO 15609-1:2004, Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding  ISO 15609-1:2004, Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding
Author: ISO/TC 44/SC 10

Buy New: $64.00
as of 7/30/2010 08:39 CDT details

Qty In Stock


Sales Rank: 3761134
Category: Book
ASIN: B000XYSGTA
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours


ISO 15614-1:2004, Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of ... and arc welding of nickel and nickel alloys  ISO 15614-1:2004, Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of ... and arc welding of nickel and nickel alloys
Author: ISO/TC 44/SC 10

Buy New: $130.00
as of 7/30/2010 08:39 CDT details

Qty In Stock


Sales Rank: 3438452
Category: Book
ASIN: B000XYSGWW
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
ISO 3271:1995, Iron ores -- Determination of tumble strength  ISO 3271:1995, Iron ores -- Determination of tumble strength
Author: ISO TC 102/SC 3/WG 11

Buy New: $58.00
as of 7/30/2010 08:39 CDT details

Qty In Stock


Sales Rank: 3947839
Category: Book
ASIN: B000Y2SVFU
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours


ISO 22846-1:2003, Personal equipment for protection against falls - Rope access systems - Part 1: Fundamental principles for a system of work  ISO 22846-1:2003, Personal equipment for protection against falls - Rope access systems - Part 1: Fundamental principles for a system of work
Author: ISO/TC 94/SC 4

Buy New: $55.00
as of 7/30/2010 08:39 CDT details

Qty In Stock


Sales Rank: 3294745
Category: Book
ASIN: B000Y2SR8G
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
ISO 4700:1996, Iron ore pellets -- Determination of crushing strength  ISO 4700:1996, Iron ore pellets -- Determination of crushing strength
Author: ISO TC 102/SC 3/WG 10

Buy New: $42.00
as of 7/30/2010 08:39 CDT details

Qty In Stock


Sales Rank: 3947838
Category: Book
ASIN: B000Y2T2LC
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours


ISO 128-50:2001, Technical drawings -- General principles of presentation -- Part 50: Basic conventions for representing areas on cuts and sections  ISO 128-50:2001, Technical drawings -- General principles of presentation -- Part 50: Basic conventions for representing areas on cuts and sections
Author: ISO TC 10/SC 1

Buy New: $50.00
as of 7/30/2010 08:39 CDT details

Qty In Stock


Sales Rank: 3939136
Category: Book
ASIN: B00186ZJHY
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
ISO/IEC TR 18001:2004, Information technology - Radio frequency identification for item management - Application requirements profiles  ISO/IEC TR 18001:2004, Information technology - Radio frequency identification for item management - Application requirements profiles
Author: ISO/IEC/JTC 1/SC 31

Buy New: $215.00
as of 7/30/2010 08:39 CDT details

Qty In Stock


Sales Rank: 4111116
Category: Book
ASIN: B000XYT6JE
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours


ISO 9555-4:1992, Measurement of liquid flow in open channels - Tracer dilution methods for the measurement of steady flow - Part 4: Fluorescent tracers  ISO 9555-4:1992, Measurement of liquid flow in open channels - Tracer dilution methods for the measurement of steady flow - Part 4: Fluorescent tracers
Author: ISO TC 113/WG 2

Buy New: $73.00
as of 7/30/2010 08:39 CDT details

Qty In Stock


Sales Rank: 4250554
Category: Book
ASIN: B000Y2TQ68
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
ISO 8549-1:1989, Prosthetics and orthotics -- Vocabulary -- Part 1: General terms for external limb prostheses and external orthoses  ISO 8549-1:1989, Prosthetics and orthotics -- Vocabulary -- Part 1: General terms for external limb prostheses and external orthoses
Author: ISO TC 168/WG 1

Buy New: $55.00
as of 7/30/2010 08:39 CDT details

Qty In Stock


Sales Rank: 3599276
Category: Book
ASIN: B000Y2TL3Q
Publication Date: August 23, 2007
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
Showing items 61-70 of 18390
« Previous123456789101112...400Next »
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
ANSI Standards
Best selling ANSI standards
ISO 10816-3:1998, Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal ... r/min and 15 000 r/min when measured in situISO 10816-3:1998, Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal ... r/min and 15 000 r/min when measured in situ
ISO 7919-2:2001, Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators ... r/min, 1800 r/min, 3000 r/min and 3600 r/ISO 7919-2:2001, Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators ... r/min, 1800 r/min, 3000 r/min and 3600 r/
ISO 1087-1:2000, Terminology work -- Vocabulary -- Part 1: Theory and applicationISO 1087-1:2000, Terminology work -- Vocabulary -- Part 1: Theory and application
ISO 12199:2000, Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabetISO 12199:2000, Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet
ISO/IEC 9796-2:2002, Information technology -- Security techniques -- Digital signature schemes giving message recovery -- Part 2: Integer factorization based mechanisms (available in English only)ISO/IEC 9796-2:2002, Information technology -- Security techniques -- Digital signature schemes giving message recovery -- Part 2: Integer factorization based mechanisms (available in English only)
ISO/IEC 20000-1:2005, Information technology - Service management - Part 1: SpecificationISO/IEC 20000-1:2005, Information technology - Service management - Part 1: Specification
ISO/IEC 17025:2005, General requirements for the competence of testing and calibration laboratoriesISO/IEC 17025:2005, General requirements for the competence of testing and calibration laboratories
ISO 22000:2005, Food safety management systems - Requirements for any organization in the food chainISO 22000:2005, Food safety management systems - Requirements for any organization in the food chain
IEC 62153-4-3 Ed. 1.0 b:2006, Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial methodIEC 62153-4-3 Ed. 1.0 b:2006, Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial method
ISO 19005-1:2005, Document management - Electronic document file format for long-term preservation - Part 1: Use of PDF 1.4 (PDF/A-1)ISO 19005-1:2005, Document management - Electronic document file format for long-term preservation - Part 1: Use of PDF 1.4 (PDF/A-1)